• Apply appropriate personal protective equipment (PPE) and follow
safe electrical work practices. See NFPA 70E or CSA Z462.
• This equipment must only be installed and serviced
by qualified
electrical personnel.
• Turn off all power supplying this equipment before working on or
inside equipment.
• Always use a properly rated voltag
e sensing device to confirm power
is off.
• Replace all devices, doors, and covers
before turning on power to this
equipment.
• Unit’s components may produce arcs or sparks.
• Do not install near batteries, in machinery space, or in an area in
which ignition-protected equipment is required.
975-0787-01-01 v
Areas include any space containing gasoline-powered machinery, fuel
tanks, as well as joints, fittings, or other connections between components
of the fuel system.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC
FLASH
Failure to follow these instructions will result in death or serious injury.
WARNING
FIRE AND EXPLOSION HAZARD
To Next Page
Loading...
