2
Operation
Chapter 2, “Operation” contains information and procedures for using
your MS2000. This chapter begins with a system startup check that
you carry out after installation and configuration to verify that the
MS2000 is operating correctly.
If you’re using the System Control Panel to operate or monitor the
status of the unit, also refer to the System Control Panel Owner’s
Guide.
WARNING: Restrictions on use
MS2000 Sine Wave Inverter/Charger shall not be used in connection with life
support systems or other medical equipment or devices.
CAUTION
Read this chapter before operating the MS2000 Sine Wave Inverter/Charger.
To Next Page
Loading...
