9. BUNGEE CORD MOUNTING
BLACK BT has four holes for bungee cord mounting:
In order to install the bungee cord:
1. Tie a knot at the end of the cord. Next, thread the bungee cord through A hole so
that the knot is placed from the display side.
2. Thread the end of the bungee cord through holes B, C and D. The length of the
knot between holes A-B and C-D should be adjusted to the hand size.
3. Tie a knot in the appropriate place on the free end of bungee cord. Cut the
remaining bungee part and singe it with a lighter.
It is advisable to tie a knot between points B and C as protection
To Next Page
Loading...
