32. SETTINGS – ALARMS 1/2
Settings -> Alarms -> Dive time
This function allows setting the dive time alarm.
Settings -> Alarms -> Max. depth
This function allows setting the maximum dive depth alarm. The alarm will be
activated each time when the current depth exceeds a particular value.
Settings -> Alarms -> Average depth
This function allows setting the average dive depth alarm. The alarm will be
activated each time when the current depth exceeds a particular value.
Settings -> Alarms -> Battery
This function allows setting the battery charge level at which the device will activate
the alarm. This alarm is active in addition to basic battery alarm which is always
displayed when battery charge level drops to 20%.
To Next Page
Loading...
