46. SOFTWARE UPDATE
The BLACK BT can be easily updated with latest software releases using the USB
connection. To update the software:
1. Register the device on http://support.xd eep.eu and download the current
firmware file that is unique for your device.
2. Connect the BLACK BT to USB port in accordance with instructions from the
previous page and copy the received file to the device memory in ‘firmware’
catalogue.
3. Disconnect the device from USB port.
4. Turn on the BLACK BT and select from the menu Settings -> System -> Restart
The device should automatically detect new software and start bootloader mode. By
pressing the right button you will start the new software. You can check the number
of the current software version installed in the device in Settings-> System ->
Information. If the device states the previous software version, check whether you
copied the correct file.
device and cannot be used on any other device. Therefore, if you
have two devices, you will have to download software for each of
To Next Page
Loading...
