24. COMPASS – CONTEXT MENU
The compass functions are available in the compass context menu. In order to enter
it, hold the right button on the compass screen. The compass context menu contains
the following functions:
Lock bearing Sets the course used for navigation.
Reset timer Resets the compass clock. This function is useful in
situations when a compass bearing is set on the
surface and navigation starts only after you enter
the water.
Pause/resume timer Holds and starts the compass clock again.
This function is useful in situations when it is
required to pause navigation for a moment.
Bearing list Allows selecting the desired bearing from the list.
Next bearing Activates the next bearing from the list.
Previous bearing Activates the previous bearing from the list.
To Next Page
Loading...
