EasyManua.ls Logo

xDEEP BLACK BT - Settings: Logbook Parameters

xDEEP BLACK BT
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40. SETTINGS LOGBOOK
Settings -> Logbook -> Depth interval
This is frequency of information log on the current depth in seconds.
Settings -> Logbook -> Temp. interval
This is frequency of information log on the current temperature in seconds.
Settings -> Logbook -> Min. time
This is the time interval in seconds after which the descent is recognized as a dive. If
a dive time is shorter than the one set, the information will not be saved in the
logbook.
Settings -> Logbook -> Min. depth
This is the minimum depth in metres or feet which should be exceeded in order for
the descent to be recognized as a dive. Information on dives not exceeding this
depth will not be saved in the logbook.
Settings -> Logbook -> Min. surf. int
This is the surface interval in seconds after which the dive is considered to be a new
one, not a continuation of the previous one. If a dive interval is shorter than the one
set, information will be saved in the logbook as an ongoing part of the previous dive.

Related product manuals