69 | Chapter 1 : DVR User Manual
User can monitor live video in 1, 4, 9 or 16 screen modes. If user wants to see single channel in full screen, user can
double-click on the left mouse button when the cursor is positioned on the live video screen. User can change to single mode
by clicking the mode icon located at the bottom left.
The image resolution in “Live monitoring” in this web browser is directly transferred from DVR
( Live image over the web browser depends on the Live Stream value on Record mode of DVR )
If live image is not properly shown on IE web browser due to network traffic jam or narrow bandwidth, it is
recommended to close and re-open the IE web browser.
To Next Page
Loading...
