Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
4-20
4. Setups
4. Select the desired setting for the specific Audio Tone feature.
Control Panel Select Tone Select the volume level that sounds when a button displayed on
the screen is correctly selected. Select from Loud, Normal, and
Soft. To disable the sound, select Off.
Control Panel Alert Tone Select the volume level that sounds when a non-functioning (or
grayed-out) button is selected or when an error occurs. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
Base Tone For a button that toggles (the setting changes each time it is
pressed), select the volume level that sounds when the button is in
its initial (first) position. This is the sound made when the Interrupt
button is released. Select from Loud, Normal, and Soft. To
disable the sound, select Off.
Machine Ready Tone Set the volume level that sounds when the machine is ready to
print or after the machine powers on. Select from Loud, Normal,
and Soft. To disable the sound, select Off.
Non-Copy Job Complete
Tone
Select the volume level that sounds when the machine completes
a job. Select from Loud, Normal, and Soft. To disable the sound,
select Off.