Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
4-21
4. Setups
Fault Tone Select the volume level that sounds when there is an error
termination. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Auto Clear Alert Tone Select the volume level that sounds when the automatic clear
feature is enabled and it is 5 seconds before the machine
automatically returns to the initial screen. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Alert Tone Select the volume level that sounds when a fault, such as a paper
jam occurs, and the fault is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Out of Paper Warning Tone Select the volume level that sounds when there is no paper in the
paper tray and the job is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Low Toner Alert Tone Select the volume level that sounds when it is time to replace the
drum toner cartridge. Select from Loud, Normal, and Soft. To
disable the sound, select Off.
5. Select Save to save the setting and return to the previous
window.