Xerox 4590 EPS/4110 EPS System Administration Guide
4-30
4. Setups
Paper tray attributes during loading
When a paper tray is removed from the machine and then
replaced, the selection made on this screen determines whether
or not the tray change is displayed on the UI.
1. From the Paper Tray Settings screen, select the Paper Tray
Attributes During Loading.
2. Select Disabled or Enabled.
Disabled Do not display the paper tray attributes on the UI while you are
loading paper in the tray.
Enabled Display the paper tray attributes on the UI as you are loading
paper into the tray.
3. Select Save to save the selection and return to the previous
screen.