Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
4-31
4. Setups
Paper tray priority
Set the paper tray priority sequence for automatic tray
selection. Automatic tray selection means that a tray containing
the appropriate paper is automatically selected by the machine for
printing.
You can select paper trays 1-4 and 6 and 7. Tray 5 (Bypass)
cannot be selected.
1. From the Paper Tray Settings screen, select Paper Tray
Priority.
2. Select the item to be set or changed, and select Change
Settings.
3. Select a Priority setting (First-Sixth) and assign a specific
tray (Tray 1 - 7) to that priority setting.
NOTE: Only one tray can be set to each priority.
4. Select Save to save the selections and return to the Paper
Tray Priority screen.
5. Select Close to return to the Paper Tray Settings screen.