Xerox 4110

Xerox 4590/4110 Copier/Printer Getting Started
1-9
1. Product Overview
Power on/off
Switch on the power before operating the machine. The machine
warms up in approximately five minutes after which you can make
copies. Switch off the machine at the end of the day or when it is
not in use for a long period of time. Use the Power Saver feature
to reduce the power consumption of the machine.
For information about power saving feature, refer to “Power Saver
mode” on page 1-11.
Power on
Perform the following to power on the machine:
1. Open the cover.
2. Press the power switch to the on position [
|].
NOTE: The "Please wait..." message on the UI indicates that the
machine is warming up. The machine cannot be used while it is
warming up.