Xerox 4590/4110 Copier/Printer Getting Started
3-11
3. Loading Paper
Loading tab paper in Tray 5 (Bypass)
1. Open Tray 5 (Bypass).
NOTE: If necessary, extend the extension flap. The extension flap
can be extended in two stages. When pulling out the
extension flap, do it gently.
2. Hold the center of the paper guides and slide them to the
desired paper size.
3. Place the paper with the side to be copied or printed facing up
and the bottom side to be fed first. Insert the paper slowly to
the end along the paper guide.
To Next Page
Loading...
