Xerox 4590/4110 Copier/Printer Getting Started
2-12
2. Basic Operation
4. From the Job Status screen, choose the job to cancel, and
then select Stop.
Printing
Use the following procedure when printing from your client
workstation.
NOTE: The printing steps and screens may vary depending on the
application software you are using. For specific information, refer
to the documentation provided with each application.
1. Select File and Print from the application’s menu.
2. Confirm the Printer Name and click Properties, if necessary.
3. Configure the properties if necessary.
4. Click OK.
5. Click OK in the Print dialog box.
To Next Page
Loading...
