Xerox 4110

Xerox 4590/4110 Copier/Printer Getting Started
3-8
3. Loading Paper
Loading paper in Tray 8 (Post-Process Inserter)
Use the following procedure for loading paper into the
Post-Process Inserter (Tray 8),
KEY POINT: The Post-Process Inserter (Tray 8) is used when
your desired output includes separators, or covers; therefore, it
cannot have an image copied on to it. Your separator or cover
paper may be blank or with an image already copied onto it.
1. Hold the center of the paper guides and slide to the desired
paper size.
2. Load the separator or cover paper into the tray; ensure that is
aligned to the front of the tray.