Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 54
Printed Error Code Description
What To Do About Printed Error Code
30000000 A scanner was previously connected to the system, but was not detected
during the boot sequence.
Power down system. Check connections between the
scanner SCSI interface and the controller. Power on
system.
30000001 A scanner is connected to the system, but no hard drive was found.
Power down the system. Verify the connections to the
internal hard disk drive. Power on the system.
30000002 A scanner is connected to the system, but fewer than 64 Mbytes of RAM were
detected.
Power down the system. Verify that SIMMs are
properly installed. Power on the system.
40000001 Controller's Accounting Disk is full. Memory allocated to Job Accounting has
reached its limit.
Use the AccXES Account Management Tool to
download the contents of the Controller's Job Log file.
If this error occurs often, increase the polling frequency
with Account Management Tool.
40000002 Controller's Accounting Records have reached their numerical limit.
Use the AccXES Account Management Tool to
download the contents of the Controller's Job Log file.
If this error occurs often, increase the polling frequency
with Account Management Tool.
50000001 The current scan has filled all available memory
Remove document. Press START to print the job.
50000002 The current scan and one or more previous scans have filled all available
memory.
Remove document. Wait for previous scans to finish
printing. End the current set and print it if a set is in
progress. Rescan the document.
50000003 The task controlling the scanner received an unrecognized request from the
task controlling the scanner Control Panel.
Power down the system. Check cables. Power on the
system.
50000004 The task controlling the scanner had an unexpected failure on a request from
the operating system.
Power down the system. Check cables. Power on the
system.
50000007 The task controlling the scanner had an unexpected failure when requesting
an operation from the scanner.
Power down the system. Check cables. Power on the
system.

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English