Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 73
Printer Feature Description/Specifications
Copy Job Input
Scanner Auto-switching w/ print mode.
Copier input from Synergix Scan System through IEEE 1394 interface. Copy/print resolution from 200 dpi to 400 dpi at speeds
from 2.0 ips to 4.0 ips.
Scanning Resolution from 100dpi to 400dpi (monochrome) at speeds up to 8 ips (depending upon selected mode).
Feature-keyed scanning speeds. Effective with Firmware Release 7.5, a new Color Enablement feature key is available enabling
Scanning-to-Net in color in TIFF and JPEG formats.
See the “Scanning resolutions and speeds table” in the XES Synergix 8825/8830/8850/8855 Digital Solution User Guide for more
details on particular resolution and scan speed combinations.
Copy Job Priority/Concurrency User-selectable priority for inserting copy jobs in internal print queue; interrupt current print job to copy or insert copy job after
current print job. If print job not interrupted, supports concurrent scanning and printing. Scan-to-Net is allowed to proceed
concurrent with printing.
Copy Job Processing
Image Processing Type (line, photo, mixed), Background (off, light, dark, auto-suppression, or Auto IQ), Contrast (7 levels) selectable prior to scan
time.
Extended Processing Options Scaling (preset, 25% - 400% in 0.1% increments, auto), Rotation (Off, auto), Auto Size Detection, Margins, Mirror, Invert. User
specified original document width input and centering. Batch mode
Recall Recall image data and copy parameters from last copy job. Can change number of copies and/or scaling factor or output format
and reprint images. Alternately, can use parameters when scanning new image.
Copy job parameter sets Supports saving and restoring up to 10 sets of copy parameters.
Sets Build Supports scanning and collating a set of documents in which the user selects unique media and image quality parameters for
each sheet for copying. Up to 200 “typical” E size pages @ 64 MB hard drive.
Batch Key Allows you to improve copy speed by enabling Batch Mode processing on the scanner.
Copy Job Output
Sample Snapshot center of document using current copy image settings and print on smallest media possible (x wide by 210 mm long
where x is the width of the original document)

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English