XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 78
Printer Feature Description/Specifications
Print Job Input
Host Interfaces Serial, Bi-directional 1284 Parallel, VPI, Ultra SCSI, 10/100 T/TX Ethernet
Network Protocols TCP/IP with 10/100 Ethernet Port
Automatic Active Port Sensing Yes
Job Spooling/Queuing Internal to controller: 143 MB+ hard disk
Job Queue Management Single prioritized queue, adjustable pre and post-render priority, job canceling, queue monitoring, resource based
scheduling
Print Job Processing
Data Formats CalComp 906/907/PCI, HP-GL (HP7585/6), HP-GL/2, HP-RTL, TIFF 6.0, Navy TIFF (NIRS), CALS I & II, CGM, VDS
(VRF, Block Raster, Compressed Raster, VOF), Versatec Raster/Green Sheet, XES 150 Emulation, VCGL, C4,
FileNET, JPEG, optional PostScript 3 with PDF
Job Control Language HP PJL & Versatec 150 Escape Sequences
Color Support Supports all color formats of the non-PostScript data formats.
Raster Imaging: Cluster dot halftoning at 45 degree screen angle supporting 256 gray levels.
Vector Rendering: Advanced stochastic halftoning technique supporting 256 gray levels.
Two user-selectable rendering options are available: Area Optimized, Line Optimized
Automatic Format Recognition Yes
Palettes and Patterns 8 User definable pen palettes, 1 read-only Factory default palette, specifying pen color, width, and pattern for up to
256 pens.
64 patterns - 33 shading patterns + 16 “random” patterns + 15 user definable patterns
Extended Processing Options Autoscaling, Autorotation, Auto Size Detect, Banner Sheets, Rotation (0, 90, 180, 270), Scaling (10% - 999%),
Justification, Margins, Plot Stamps, Labeling, Page Composition/Plot Overlay, Mirror Image, Plot Nesting
Copy Job Input
Scanner Auto-switching w/ selected print mode. Copier input from Synergix Scan System through IEEE 1394 interface.
Copy/print Resolution from 200 dpi to 400 dpi at speeds from 2.0 ips to 4.0 ips. Scanning resolution from 100 dpi to
400 dpi at speeds up to 8 ips, depending on whether line, photo, or mixed print mode is used.
Copy Job Priority/Concurrency User-selectable priority for inserting copy jobs in internal print queue; interrupt current print job to copy or insert copy
job after current print job. If print job not interrupted, supports concurrent scanning and printing.
To Next Page
Loading...
Need help?
General