Back to Previous Page
7
Perform these steps from the printer’s control panel.
1. Press the System Information/ Machine Status button.
2. Use the Down arrow and OK button to follow this navigation pathway: Down
arrow, Network, OK > Down arrow, Wi-Fi, OK > Down arrow, Wi-Fi Settings,
OK.
3. “Wizard” will be displayed. Press OK. The Wireless Wizard will search for
wireless networks. When the search is complete, press the Up or Down arrow to
find your network and then press OK.
4. “WPA Key” will be displayed, asking for your Wi-Fi network password. Use the
Up or Down arrow to find the characters and then press OK to select them. After
entering the last character, press OK again. (Note: Password is case sensitive.
Uppercase letters are after the lowercase in the scroll list.)
5. “Apply?” will be displayed. Press OK to save the password.
6. “Connecting” will be displayed for several seconds and then change to
“Connected” if successful.
To view a video about setting up Wi-Fi, click here.
Next
Add the Printer to the Wi-Fi Network
Back to Start
To Next Page
Loading...
