Managing the Printer
Xerox
®
B210 Printer
User Guide
121
Managing the Printer
Billing Meter Information
You can view billing meter information using Xerox
®
CentreWare
®
Internet Services. The billing meter
displays the total number of impressions that the printer generated or printed during its lifetime. You
cannot reset the counters. A page is counted as one side of a sheet of paper. For example, a sheet of
paper that is printed on two sides counts as two impressions.
Viewing Billing Information Using Xerox
®
CentreWare
®
Internet Services
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. Click Properties.
3. Click General Setup
Billing & Counters.
4. To view the printer serial number and total impressions, click Billing Information. To update the
page, click the Refresh option.
5. To view the count for each type of device usage, click Usage Counters. To update the page, click
the Refresh option.
Software Updates
Xerox is continually seeking to improve its products. A software revision may become available to
improve the functionality of your printer. The Software Upgrade feature allows the customer to
upgrade the printer software without needing a Customer Service Representative to be present.
The software can be upgraded over a network connection using Xerox
®
CentreWare
®
Internet Services.
Before starting please ensure that the following tasks have been performed:
• Any jobs in the printer queue must be allowed to complete or be deleted before initiating a
software upgrade. The software upgrade procedure will prevent further jobs from being received
until the upgrade has completed.
• Obtain the new software upgrade file for your printer from www.xerox.com/office/B210drivers.
Select the correct upgrade file for your printer model. The upgrade file will have an extension of
.hd. Download the upgrade file to a local or network drive. You will be able to delete the file after
the upgrade procedure.
• TCP/IP and HTTP protocols must be enabled on the printer so that the printer web browser can be
accessed.
All configured network settings and installed options will be retained by the printer after the software
upgrade process.