PPaappeerr JJaamm iinn tthhee MMuullttiippuurrppoossee FFeeeeddeerr
1. Remove paper from the multipurpose feeder.
2. Remove the jammed paper.
Note: Ensure that all paper fragments are removed.
3. Close the multipurpose feeder.
4. Open the front door.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of
the printer.
5. Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum. Doing so may affect the quality of
future print jobs.
6. Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
7. Insert the imaging unit.
8. Close the door.
13
To Next Page
Loading...
