Xerox B315 - Page 15

4. Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
5. Insert the imaging unit.
6. Close the front door, then insert the tray.
7. Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
8. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
9. Close the rear door.
10. Remove the optional tray.
11. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
12. Insert the tray.
15