You can select a time period between 0-60 minutes and 0-59 seconds. The default setting
is 2 minutes, 0 seconds.
Power Saver
Use this feature to set the time that lapses until the machine and system PC UI enter a
reduced power consumption mode. The timers are activated when all print jobs have
been completed and there are no jobs in the job queue.
The Power Saver feature consists of the following options:
• Enter Power Saver
- System PC & Print Engine
- Print Engine Only
- Print Engine Only If No Communication For
• Exit Power Saver
- Automatically
- Manually
The machine and/or system PC exits the power saver mode when a job is sent from the
print server to the machine or when the system PC UI is activated.
Tip
The System PC & Print Engine and Print Engine Only features must be enabled by your
Xerox representative before you can use them. If these features are not enabled, call
your Xerox representative for more information.
5-15
Xerox
®
Color 800/1000 Press
System Administration Guide
System Settings
To Next Page
Loading...
