Image Quality tab
This feature allows administrators to select the default setting in order to achieve
maximum image quality on the printed output.
The Image Quality feature consists of:
• Priority When Switching Paper Types: Choose from one of two options
- Image Quality: This selection provides the best image quality possible on the
transparency output but the machine runs at a slower print speed in order to
achieve this high image quality on the output.
- Productivity: This selection allows the machine to run at the rated press speed
(100 ppm) but the output may not provide the best image quality possible.
• Registration Control Setup: Run this option when image quality issues such as
color-to-color, lead edge, and side edge registration problems occur on printed output.
Running this option may fix the registration issues without placing a service call.
• Fuser Belt Refresh: Refer to Fuser Refresh Mode section for more information on this
option.
Related Topics:
Fuser Refresh Mode
Xerox
®
Color 800/1000 Press
5-24
System Administration Guide
System Settings
To Next Page
Loading...
