Alignment options
Alignment options include Registration, Perpendicularity, Skew, and Magnification.
When selecting/editing the various Alignment options, consider these tips:
• The arrows above the paper illustration indicate the feed direction.
• Use the up/down arrow buttons to make the desired selections.
• As you click the up/down arrow buttons, the illustration moves indicating the direction
that the image will move or increase/decrease on the paper.
Note
The factory default setting for all the Alignment options is zero.
Before creating/using an alignment profile
Perform the following procedure before creating a new or using an existing alignment
profile.
1. Load the appropriate stock into the desired tray.
2. Print a sample output and check for any misalignment of the output image.
3. If the output image is misaligned, perform the instructions provided in the Create/edit
an Alignment profile procedure.
6-9
Xerox
®
Color 800/1000 Press
System Administration Guide
Profiles
To Next Page
Loading...
