2. Select the System Settings button.
3. Select the Output Devices tab.
4. Select the desired High Capacity Stacker Settings.
Note
The Auto Output Switching and Auto Output Switching Priority options are available
ONLY when there is more than one HCS attached to the machine.
5. Select the desired Perfect Binder Settings.
6. Select OK to save your changes and close the System Settings window.
7. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
5-23
Xerox
®
Color 800/1000 Press
System Administration Guide
System Settings
To Next Page
Loading...
