Xerox CopyCentre C123 User Guide

System Administrator Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 253
Comments
Use this feature to register a comment to be used when attaching a cover note. You
can register up to 50 comments; each comment can include up to 18 alphanumeric
characters.
1. Select [Comments] on the
[Setup Menu] screen.
2. Perform the necessary
operations.
3. Select [Close].
Paper Type
Use this feature to set the paper type for each tray.
1. Select [Paper Type] on the
[Setup Menu] screen.
2. Perform the necessary
operations.
3. Select [Close].
Tray 1–5 (Bypass)
Sets the paper type loaded in each tray.
System Administrator Settings
This feature allows you to customize many settings on the machine to suit your
particular requirements. The machine enters the Key Operator mode only when a
correct System Administrator Login ID is entered. Before shipment, the default System
Administrator Login ID is set to “11111”. The [System Administrator Settings] screen
allows you to start procedures for changing the default System Administrator Login ID.
For more information, refer to the following.
System Administrator Login ID – page 254
System Administrator Password – page 254
Maximum Login Attempts – page 255

Xerox CopyCentre C123 Specifications

General

Brand	Xerox
Model	CopyCentre C123
Category	All in One Printer
Language	English