Xerox CopyCentre C123 User Guide

Login Setup/Auditron Administration
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 255
Maximum Login Attempts
With this feature enabled, the machine denies access when an incorrect System
Administrator ID is entered the selected number of times. You can select this number
in the range from 1 to 10.
1. Select [Maximum Login
Attempts] on the [System
Administrator Settings] screen.
2. Perform the necessary
operations.
3. Select [Save].
Login Setup/Auditron Administration
The Auditron feature is used to prevent the machine from being used by unauthorized
users, impose different restrictions on individual users (accounts), and track the total
number of copies, faxes, scanned pages, and prints for each account. When the
Auditron feature is active, users need to enter a correct user ID, or both user ID and
password, in order to use the machine. Using entered user IDs, the Auditron identifies
different accounts and tracks jobs done with each account. The [Login Setup/Auditron
Administration] screen allows you to start configuring various Auditron settings. For
more information, refer to the following.
Create/Check User Accounts – page 256
Reset User Accounts – page 257
System Administrator Copy Meter – page 258
User Details Setup – page 258
Charge Print Settings – page 259
Fax Billing Data – page 260
Remote Login Setup – page 260
Login Setup/Auditron Mode – page 261
1. Select [Login Setup/Auditron
Administration] on the [System
Settings] screen.
2. Select the required option.
3. Select [Close].

Xerox CopyCentre C123 Specifications

General

Brand	Xerox
Model	CopyCentre C123
Category	All in One Printer
Language	English