Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide
57
Error Code Cause and Remedy
018-502 [Cause] The machine failed to transfer data using SMB of the Scan to PC service
because computers allowed to login are restricted.
[Remedy] Confirm the property information for the specified user, and check whether
the computers allowed to login to the server are restricted.
018-505 [Cause] Failed to log into the destination computer while transferring data using
SMB of the Scan to PC service.
[Remedy] Check whether the user name and password of the SMTP server registered in
the machine is correct.
018-543 [Cause] The machine failed to transfer data using SMB of the Scan to PC service
because one of the following problems occurred on the shared name of the SMB server
when logging in to the SMB server:
The specified shared name does not exist on the server. Invalid characters are used in
the specified shared name.
When the server is Macintosh, the specified shared name may not have an access right.
[Remedy] Confirm the specified shared name, and set the name correctly.
018-547 [Cause] The machine failed to transfer data using SMB of the Scan to PC service
because the number of users logging into the SMB server exceeded the limit when
logging in to the SMB server.
[Remedy] Take one of the following measures:
Confirm how many users can access the shared folder.
Check whether the number of login users have exceeded the limit.
018-596 [Cause] An error occurred during LDAP server authentication.
[Remedy] Execute the operation again. If the error still is not resolved, contact our
Customer Support Center.
018-781 [Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. Connection to the server cannot be established for the Address Book query.
[Remedy] Take one of the following measures:
Confirm the network cable connection.
If the network cable connection has no problem, confirm the active status of the target
server.
Check whether the server name has been correctly set for [LDAP Server/Directory
Service Settings] under [Remote Authentication Server/Directory Service].
018-782
018-783
018-784
018-785
018-786
018-787
018-788
018-789
018-790
018-791
018-792
018-793
018-794
018-795
018-796
018-797
[Cause] An LDAP server protocol error occurred as a result of the Address Book
operation. The server returned RFC2251 Result Message for Address Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
To Next Page
Loading...
Need help?
General
