Xerox DocuMate 4440 User Manual

Xerox DocuMate 4440
User’s Guide
103
Image Editors
Image editors include Microsoft Paint and other drawing and graphics applications.
Supported file formats—The available file formats are based on the selected destination application.
For example, you can scan to Microsoft’s Paint application as a BMP, GIF, PNG, or JPG, but not as TIFF
or JP2 as Paint cannot open those two file types. Please refer to Image Formats on page 66 for more
information on which image formats One Touch supports.
Destination type—This destination type is classified as a “Simple Image Link”. To make it available in
the destination list, you must select Image editors (i.e. Paint) on the Options tab in the One Touch
Properties window. If the image editing application you are using does not appear in the Select
destination list, you can add the application using the Image Documents One Touch Link Properties
window.
1. In the One Touch Properties window select one of the default image editors such as Microsoft
Paint.
2. Click on the Properties button to open the Image Documents One Touch Link Properties window.
From this window you can add an application and set additional document handling options.
Note that if you recently installed an application, click the Refresh button to see if One Touch will
automatically configure the link before you try adding it manually.

Xerox DocuMate 4440 Specifications

General

Brand	Xerox
Model	DocuMate 4440
Category	Scanner
Language	English