Xerox DocuMate 4440 User Manual

Xerox DocuMate 4440
User’s Guide
164
Uninstalling Your Scanner
To uninstall the Xerox DocuMate 4440 scanner, remove the scanner software and any other scanning
software provided with the scanner.
When uninstalling the scanner driver or One Touch, please leave the scanner's USB cable plugged into
the computer. Unplug the USB cable from the computer after the software uninstall program closes.
Uninstalling the Scanner and One Touch Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows XP: Double-click the Add/Remove Programs icon.
Windows Vista and Windows 7: Double-click the Programs and Features icon.
3. From the list of programs, select Xerox DocuMate 4440 Driver.
Click the Change/Remove or Uninstall button.
4. Click Yes when asked to confirm that you want to remove these software programs.
5. Follow these same steps to select and remove the One Touch software, the Kofax VirtualReScan
and the One Touch ScanSoft OmniPage OCR modules from the installed programs list.
6. The scanner driver and One Touch software is removed from your computer.
7. Unplug the USB cable from the scanner.
8. Close all open windows and restart your computer.
Uninstalling the PaperPort and OmniPage Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows XP: Double-click the Add or Remove Programs icon.
Windows Vista and Windows 7: Double-click the Programs and Features icon.
3. Select PaperPort or OmniPage and click Remove.
4. A message window opens, asking if you are sure you want to remove PaperPort or OmniPage from
your computer. Click Yes.
5. Close all open windows and restart your computer.

Xerox DocuMate 4440 Specifications

General

Brand	Xerox
Model	DocuMate 4440
Category	Scanner
Language	English