Xerox DocuMate 4440 User Manual

Xerox DocuMate 4440
User’s Guide
35
Installing One Touch
The One Touch software installation will start automatically after you click Close on the driver
Installation Complete window. One Touch is the software needed for the buttons on the scanner to
work.
1. Click Next on the Welcome to the One Touch Setup Wizard.
2. On the Visioneer License Agreement window, read the license agreement. If you accept the terms,
select I Agree then click Next.
If you choose not to accept the license agreement, the installation will terminate and One Touch
will not be installed.
3. Click Close on the Installation Complete window to close and exit the software installer.
If you selected other software to install from the DVD the installation for that software will
automatically start after you click Close on the Installation Complete window. Follow the instructions
on-screen to install each application you selected.

Xerox DocuMate 4440 Specifications

General

Brand	Xerox
Model	DocuMate 4440
Category	Scanner
Language	English