Xerox DocuMate 700 User Manual

User’s Guide 67
DocuMate 700 Scanning from TWAIN
7. Click on the Scan button in the PaperPort scan pane.
8. When the TWAIN interface opens, click on the Advanced Interface button.
9. Click on the Device Configuration Properties button to open the hardware device options
for your scanner.
10. Click on the menu next to Combine with. Select the scanner you want to use with the
DocuMate 700, in this example the other installed scanner is the DocuMate 262i.
NOTE: The options to turn the scanner lamp on or off are disabled when opening the Device
Configuration window from TWAIN. If you want to change the settings for the lamp, please
refer to “Checking the Hardware and Setting the Lamp Power Saving” on page 51.
11. Click on OK.
12. Click Done in the TWAIN interface.
13. Click on the Scan button in the PaperPort scan pane to reopen the TWAIN interface.

Xerox DocuMate 700 Specifications

General

Brand	Xerox
Model	DocuMate 700
Category	Scanner
Language	English