Xerox DocuMate 700 User Manual

Maintenance DocuMate 700
82 User’s Guide
Uninstalling Your Scanner
To uninstall the Xerox DocuMate 700 scanner, remove the scanner software, PaperPort, or any
other scanning software provided with the scanner.
Uninstalling the Scanner and One Touch Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add/Remove Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. From the list of programs, select One Touch 4.0.
Click the Change/Remove button.
4. Click Yes when asked to confirm that you want to remove these software programs.
5. Follow these same steps to select and remove the One Touch 4.0 ScanSoft OmniPage OCR
module from the installed programs list.
6. The One Touch 4.0 software is removed from your computer.
7. Unplug the USB cable from the scanner.
8. Close all open windows and restart your computer.
Uninstalling the PaperPort and OmniPage Software
1. On the Windows taskbar, click Start, point to Settings, then click Control Panel.
2. Windows 2000 and XP: Double-click the Add or Remove Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. Select PaperPort or OmniPage and click Remove.
4. A message window opens, asking if you are sure you want to remove PaperPort from your
computer. Click Yes.
5. Close all open windows and restart your computer.

Xerox DocuMate 700 Specifications

General

Brand	Xerox
Model	DocuMate 700
Category	Scanner
Language	English