S
ETTING
U
P
Y
OUR
P
RINTER
2.8
2
3
Load paper
with the print side facing up
.
Make sure that all four corners are flat in the tray.
4
Pay attention not to overload paper. Paper overloading may
cause paper jams.
5
Pinch the rear guide to adjust for the paper length and
pinch the side guide and slide it to the left flush against the
paper.
Notes:
• Do not push the width guide far enough to cause the material to
warp.
• If you do not adjust the width guide, it may cause paper jam.
To Next Page
Loading...
Need help?
General