Xerox Phaser 3117 - Editing a Watermark; Deleting a Watermark

Advanced Printing
13
2 Click the Other Features tab, and click the Edit button in
the
Watermark section. The Edit Watermark window
appears.
3 Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays
in the preview window.
When the
First Page Only box is checked, the watermark
prints on the first page only.
4 Select watermark options.
You can select the font name, style, size, or grayscale level
from the
Font Attributes section and set the angle of the
watermark from the Message Angle section.
5 Click Add to add a new watermark to the list.
6 When you have finished editing, click OK and start
printing.
To stop printing the watermark, select
<No Watermark> from
the
Watermark drop-down list.
Editing a Watermark
1 To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 4.
2 Click the Other Features tab and click the Edit button in
the
Watermark section. The Edit Watermark window
appears.
3 Select the watermark you want to edit from the Current
Watermarks
list and change the watermark message and
options.
4 Click Update to save the changes.
5 Click OK until you exit the Print window.
Deleting a Watermark
1 To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 4.
2 From the Other Features tab, click the Edit button in the
Watermark section. The
Edit Watermark window
appears.
3 Select the watermark you want to delete from the Current
Watermarks
list and click Delete .
4 Click OK until you exit the Print window.