EasyManua.ls Logo

Xerox Phaser 6110 - Installing the Toner Cartridges

Xerox Phaser 6110
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting Up Your Printer
2.
2
CAUTION
: If you have to move the
printer laid a side or upside down,
remove the waste toner container from
the printer and move it separately. Or the
inside of the printer may be
contaminated.
Installing the Toner Cartridges
1
Open the front cover.
2
Pull and remove the paper protecting the imaging unit.
3
Remove four dummy caps which are on the toner cartridge
entrances of the imaging unit.
4
Remove the toner cartridges from their bags.
5
Holding the toner cartridges, shake thoroughly them from
side to side to distribute the toner.
6
Remove the cartridges cap.
NOTE
:
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into
fabric.
7
On the imaging unit of the printer, labels identify which
colour cartridge goes into each cartridge slot.
Cyan
Magenta
Yellow
Black

Table of Contents

Other manuals for Xerox Phaser 6110

Related product manuals