Using SetIP
4
2 Using SetIP
N
OTE
:
To install Set IP, select
Install SetIP Utility
on
installation window appears. For details, see “Installing
Software” on page 3.
1
From the Windows Start menu, select
Programs
or
All Programs
Æ
Xerox Phaser 6110
Æ
SetIP
Æ
SetIP
.
The program automatically detects and displays new
and configured print servers on your network.
2
Select the name of your printer and click . If you
cannot find your printer name, click to refresh
the list.
N
OTE
:
The refreshed list doesn’t show your printer, click
enter your network printer card’s IP address, subnet mask,
default gateway, and then click
Apply
.
3
Click
OK
to confirm the settings.
4
Click
Exit
to close the SetIP program.
To Next Page
Loading...
