Xerox PHASER 7500 User Manual

Troubleshooting
Phaser 7500 Color Printer
User Guide
138
Ink Rubs Off After Printing
Toner Smudges and Residual Images Print
Probable Causes Solutions
The media is moist from humidity. Remove the moist media and replace it with new, dry
media.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
Media type is set incorrectly. When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.
Probable Causes Solutions
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
Media type is set incorrectly. When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm