Xerox PHASER 7500 User Manual

Troubleshooting
Phaser 7500 Color Printer
User Guide
139
Toner Smudges Appear on the Back of the Page
Probable Causes Solutions
The media transfer roller is dirty. Check the transfer roller for toner accumulation.
Replace if necessary.
The media path is dirty with toner. Print several blank sheets and the excess toner should
disappear.
Foreign material has entered the printer. Check the transfer belt for foreign material or
damage.
Check the fuser for foreign material.
One or more of the imaging units may be defective. Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm