Xerox PHASER 7500 User Manual

Network Basics
Phaser 7500 Color Printer
User Guide
51
Setting the IPv6 Address Using CentreWare IS
To manually set the IPv6 address using CentreWare IS:
1. Launch your Web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel, then click TCP/IP.
5. Click the TCP/IP (v6) button.
6. In the Manual Address Assignment field, select Use this address, and then type the address.
7. Click the Save Changes button at the bottom of the page.
Address Precedence
Address precedence can be set to prefer IPv6 or IPv4 addresses when both types are available. The
default setting is to prefer IPv6 addresses. Address Precedence can only be set in CentreWare IS.
Using CentreWare IS
To set address precedence using CentreWare IS:
1. Launch your Web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel, then click TCP/IP.
5. Click the TCP/IP (v6) button.
6. In the Address Precedence field, select the desired option.
7. Click the Save Changes button at the bottom of the page.

Xerox PHASER 7500 Specifications

General

Brand	Xerox
Model	PHASER 7500
Category	Printer
Language	English