Xerox PHASER 7500 User Manual

Printing
Phaser 7500 Color Printer
User Guide
81
Selecting Paper Type to Use
When you send your print job to the printer, you can choose to let the printer automatically select
which paper to use based on your document size and the paper type you select, or you can force the
printer to use paper from a specific tray.
Selecting Paper Type to Use for a Supported Driver
Windows 2000 and newer
1. In the printer driver, select the Paper/Output tab.
2. To change the paper, select the arrow next to the Paper section and select the paper type from the
list.
• To specify a tray, select the tray in the Select by Tray menu.
• To specify a paper type, select the type in the Other Type menu.
• To specify a paper size, select the Other Size menu item and select the Output Paper Size in
the Paper Size dialog box.
• To specify both a paper type and tray, select Advanced Paper Selection.
Macintosh OS X 10.3 and newer
1. In the Print dialog box, select Paper Feed.
2. From the All pages from drop-down list, click Auto Select to select the paper based on your
application settings, or select a specific paper type or tray.

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm