Maintenance
Phaser 7500 Color Printer
User Guide
100
Cleaning the Printer
• Cleaning the Exterior on page 100
• Cleaning the LEDs on page 100
Cleaning the Exterior
To remove stains, clean the outside of the printer using a soft, damp cloth moistened with a mild
neutral detergent. Do not spray detergent directly onto the printer.
Warning: To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.
Cleaning the LEDs
Note: Each imaging unit has a cleaning rod located inside its slot.
1. Open the front door.
To Next Page
Loading...
Need help?
General