Xerox PHASER 7500 User Manual

Network Basics
Phaser 7500 Color Printer
User Guide
41
7. Select the Advanced tab. Verify that the correct printer driver is installed.
8. Select the Ports tab. Verify that the IP Address in the Print to the Following Ports list is identical to
the one on the Configuration page. You may need to click the Configure Port button to see the IP
address. If necessary, re-select the TCP/IP number used for the printer.
Printing a Test Page
To print a test page:
1. Select the General tab.
2. Click Print Test Page. If the printer does not print, select PhaserSMART Technical Support on the
Troubleshooting tab of your Windows printer driver to access PhaserSMART Technical Support.
See also:
Online Support Assistant at www.xerox.com/office/7500support

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm