Printing
Phaser 7500 Color Printer
User Guide
60
4. When the control panel prompts you to confirm the type and size of paper in the tray, press the OK
button to use the current tray setup. If you loaded a new size or type of paper in the tray, do
the following:
a. Select Change setup, then press the OK button.
b. Select the appropriate paper type, then press the OK button.
c. Select the appropriate paper size, then press the OK button. For some sizes that can be loaded in
either direction, you need to select the size with the letters LEF (Long-Edge Feed). If you loaded a
custom paper size, select it if it is already defined. If not, select New Custom Size for the paper
size and follow the prompts; see Using Custom Size Paper on page 73 for more information.
Short-Edge Feed
Use short-edge feed for sizes that do not fit long-edge feed or when the media curls or peels, such as labels.
1. Open Tray 1 (MPT).
2. Load the paper or other media with the short edge against the printer.
•For single-sided printing, place side one facedown, with the top of the page entering the
printer first. Prepunched holes should be at the front of the printer.
7500-036
7500-123
To Next Page
Loading...
Need help?
General
