Paper and Media
42 Phaser 7800 Color Printer
User Guide
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray. Do one of the following:
For long-edge feed 1-sided printing, insert letterhead, pre-printed paper, and labels face down
with the top edge toward the front. Load hole punched paper with the holes to the left.
To Next Page
Need help?
General