Xerox Phaser 7800DN User Manual

Paper and Media
52 Phaser 7800 Color Printer
User Guide
Changing Paper Size, Type, and Color
When Tray 1 is set to Bypass or Fully Adjustable mode, you can change paper settings each time you load
the tray. When you load paper into an empty tray, the control panel prompts you to set the paper size,
type, and color.
When Trays 2–5 are set to Fully Adjustable mode, open the selected tray and load the desired paper.
When you close the tray, the control panel prompts you to set the paper size, type, and color.
When a paper tray is set to Dedicated mode, the control panel does not prompt you when you load paper.
If you move the guides to load a different paper size in Trays 2–5, the control panel displays an error
message. Once you load the new paper, change the size, type, and color of paper at the control panel.
To set the paper size, type, or color for a dedicated tray:
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Tray Management.
3. Touch Tray Settings, then select a dedicated tray.
4. To modify the tray settings, touch Edit.
5. Select Size, Type, or Color.
6. Scroll through the list as needed, and touch the desired paper setting.
7. Touch OK.
8. To save the setting, touch OK.
Note: To access the Tray Management menu, you can be required to log in as the system
administrator. For details, see the System Administrator Guide at www.xerox.com/office/7800docs.

Xerox Phaser 7800DN Specifications

General

Brand	Xerox
Model	Phaser 7800DN
Category	Printer
Language	English