Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-22
Turning Off the Printer
To turn off the printer:
1. Press the power switch located under the interface cover on the right side of the printer to
turn it off.
2. Within 10 seconds after turning off the printer, select
Shut Down for Moving Printer on
the control panel.
Caution: If you receive a Power Down Error-Head not Parked message at the control
panel, the printer is not ready to be moved. If the printhead is not locked, the printer can be
damaged during shipment.
8860p-030
To Next Page
Loading...
