Configuring the Network Address
Phaser® 8560/8860 Printer
2-8
Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor
networked printers from your desktop using an embedded web server. For complete
information about CentreWare IS, click the Help button in CentreWare IS to go to the
CentreWare IS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. Enter or modify the settings, and then click Save Changes at the bottom of the page.
See also:
For the Phaser 8560 printer:
Advanced Features Guide at www.xerox.com/office/8560Psupport
System Administrator Guide at www.xerox.com/office/8560Psupport
For the Phaser 8860 printer:
Advanced Features Guide at www.xerox.com/office/8860support
System Administrator Guide at www.xerox.com/office/8860support
To Next Page
Loading...
